Candy PL 330 W UNI Manuel d'utilisateur télécharger pdf (Page 7)

INSTRUCTIONS FOR ASSEMBLY OF THE HOB

TO THE GAS SUPPLY PIPES

These instructions are for Fitters qualified for installation of equipment in line with the

relevant national standard. All work must be carried out with the electricity supply dis-

connected.

ASSEMBLY PROCEDURE

2 Spanners, sizes 17 and 23 mm are required.

1/2” GAS

A) As illustrated, as-

semble parts in se-

quence:

A) fixed pipe

B) washer

C) Elbow fitting with

tapered thred

connection

2) Tighten the joints

with the Spanners,

remembering to twist

the pipes into position

before tightening.

3) Attach fitting C to

mains supply using

rigid copper pipe.

VERY IMPORTANT

For ease of installation and to avoid gas leaks, it is recommended to con-

nect the pipes as follows:

First connect the pipe to the Hob

and then

Connect the pipe to the gas supply.

In this sequence is not followed, there is a danger that gas will be trapped

in the pipe.

AFTER INSTALLATION, CHECK THE TIGHTNESS OF ALL JOINTS USING

A SOAPY SOLUTION

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Candy PL 330 W UNI Manuel d'utilisateur Page 7